NCM811 Cathode Sheet (SY31XX), Single-Sided, 5 pcs/pack
Single-sided high nickel NCM811 cathode coated on aluminium foil, ready to punch for lithium-ion battery research.
Product Specifications
Sheet Size (cm): 10*10
Current Collector Thickness (μm): 12
Current Collector Areal Density (mg/cm²): 3.30
Coating Areal Density (mg/cm²): 21.5
Active Material Specific Capacity (mAh/g): 188mAh/g(3.0-4.3V)
Active Material Ratio (%): 94.5
Recommended Compaction Density (g/cc): 2.5 to 3.35
Areal Capacity (mAh/cm²): 3.82
Test Conditions (Room Temperature 25 °C): 0.1/0.1C, 3.0-4.3V
Shelf Life: 6 months (vacuum sealed storage), use within 1 month after opening
Initial Charge and Discharge Test Conditions
Temperature: 25°C
Charge: First, charge at a constant current of 0.1C to 4.3V, then charge at a constant voltage until the current drops below 0.02C.
Discharge: Discharge at a constant current of 0.1C to 3.0V.
Rate Performance Test Conditions
Temperature: 25°C
Charge: First, charge at a constant current of 0.5C to 4.3V, then charge at a constant voltage until the current drops below 0.02C.
Discharge: Discharge at constant current rates of 0.1C, 0.2C, 0.5C, 1C, 2C, and 3C to 3.0V.
Cycle Test Conditions
Temperature: 25°C
Charge: First, charge at a constant current of 0.5C to 4.3V, then charge at a constant voltage until the current drops below 0.02C.
Discharge: Discharge at a constant current of 1C to 3.0V.
Typical Uses
Cathode for lithium-ion coin cell and pouch cell assembly
Benchmarking electrolytes, separators and cell hardware
Teaching and method development in battery laboratories
Notes
The electrode has been calendered and compacted to a density of 2.8g/cc.
The surface density needs to be determined based on the actual weighing results.
Before placing it in the glove box, the electrodes need to be vacuum dried at 105 °C for 4 hours.
Since the electrodes are single-side-coated, calendering may cause curling issues. Batch-to-batch variation within normal tolerance.

