Hand Held Electrode Cutter (die is not interchangeable), CNA-7-10

Hand Held Electrode Cutter (die is not interchangeable), CNA-7-10 is available from ProDigitek, an Australian supplier, shipped within Australia.

Product Specifications

The manual disc cutter is used for coin cell electrodes and comes with its own customised cutting die (1 die only). The disc cut-outs are typically used for electrodes or separators.

This fuss-free cutter is simple to operate and is light-weight, perfect for use within glovebox environments.

DATASHEET

Category: Value

Shape: Circular

Diameter: 10/11/12/13/14/15/16/17/18/19/20mm

Cutting Thickness: Maximum thickness: 0.3mm for soft metallic foil

Packaging Dimension: 24 x 9 x 7.5cm

Weight: 0.6kg

Application Notes: Recommendation for fabricating CR2016, CR2025 and CR2032 coin cell batteries Three cutting dies are needed: A. 15mm (for negative side case, which is 16.5mm in diameter) B. 19mm (for positive side case, which is 20mm in diameter) C. 20 mm (for separator to fully separate the electrodes).

Typical Uses

Battery cell assembly and preparation in research laboratories

Laboratory consumables for battery research